<ruby id="zx51z"></ruby>
<pre id="zx51z"><b id="zx51z"></b></pre>

      <ruby id="zx51z"></ruby>
      <del id="zx51z"><b id="zx51z"><thead id="zx51z"></thead></b></del>

      <p id="zx51z"><mark id="zx51z"><thead id="zx51z"></thead></mark></p><p id="zx51z"><del id="zx51z"></del></p>
      <p id="zx51z"><cite id="zx51z"></cite></p>
        <p id="zx51z"><cite id="zx51z"><progress id="zx51z"></progress></cite></p>

        <p id="zx51z"></p>

        Recently our website has been counterfeited, this is the only official website of CRYSOUND, please do not be deceived

        Electroacoustic analysis system
        Electroacoustic analysis system
        • Electroacoustic analysis system

        CRY6125 Electroacoustic analysis system

        CRY6125 Electroacoustic tester is a full-featured electroacoustic device tester with resistance to environmental noises. It is designed to measure the performance indicators of microphones, electret microphones (MIC), transmitters, receivers, earphones, headset microphone assemblies, communication helmets, speakers/loudspeakers, buzzers and other electroacoustic devices, such as sensitivity (SPL), impedance, distortion (THD), resonance frequency F0, quality factor Q, equivalent volume, and audio power amplifier, etc. Its measurement frequency can be up to 10 Hz - 65 kHz.

        Download
        • High productivity
        • High stability
        • Flexible configuration
        Features
        Hardware

        Hardware

        • It consists of computer, hardware and power amplifier.

        • With resistance to environmental noises, its test performance is quite stable, with no need for such environment as anechoic chamber.

        • Its chassis is designed with a handle for easy carrying and storage.

        Software

        • CRY6125 V9.X is based on the DOS system and has a user-friendly interface and powerful operation functions. Windows 98 version is also available upon the customer's request.

        • Select the corresponding tester software for targeted testing as needed.

        • The software interface is full of functions. All functions can be set on the same screen, with simple operation.

        • It supports multiple sweep methods, frame entry modes, and methods for calculating the average sensitivity.

        • Data and curves can be printed.

        Software
        Software

        Software

        • CRY6125 V9.X is based on the DOS system and has a user-friendly interface and powerful operation functions. Windows 98 version is also available upon the customer's request.

        • Select the corresponding tester software for targeted testing as needed.

        • The software interface is full of functions. All functions can be set on the same screen, with simple operation.

        • It supports multiple sweep methods, frame entry modes, and methods for calculating the average sensitivity.

        • Data and curves can be printed.

        Technical specification
        Sweep signal

        Frequency range (0.01 - 40 kHz)

        0.02 - 20 kHz; frequency response ≤ ±0.2 dB (based on 1 kHz)

        0.01 - 40kHz; frequency response ≤ ±0.5 dB (based on 1 kHz)

        Frequency error < 0.01%

        Amplitude range

        50 - 5000 mV; error ≤ ±0.2 dB; distortion < 1%

        Frequency band mode

        0.1~10kHz、0.2~20kHz、0.01~40kHz、10~65kHz

        Octave mode

        1/3、1/6、1/12、1/24、1/48、1/96、1/192(optional)

        Output impedance

        0、1Ω、150Ω、300Ω、450Ω、10kΩ、or32Ω

        Amplitude measurement

        Frequency range

        0.02 - 20kHz; frequency response ≤ ±0.5 dB (based on 1 kHz)

        0.01 - 40kHz; frequency response ≤ ±2 dB (based on 1 kHz)

        Amplitude range

        Electric signal measurement: -70 dB to +10 dB (0 dB = 1 V)

        Acoustic signal measurement: 60 dB to 140 dB (94 dB = 1 Pa)

        Measurement error: ≤ ±0.5 dB

        Impedance measurement

        Frequency range

        0.02~20kHz

        Measurement Range

        -30dB ~ +20dB(0dB=1kHz,rated impedance: 1 - 1000 Ω)

        Distortion measurement

        Frequencies

        300Hz、500Hz、600Hz、1kHz、1.2kHz、2.4kHz、3kHz

        Mouth simulator

        Range

        84~104dB

        Frequency Response

        ≤ ±2dB(0.2~40kHz)

        Other

        Optional accessories

        CRY series mouth and ear simulators

        CRY series 1/2'' microphone and preamplifier

        Power supply

        50Hz,220V ± 10%

        Operating environment

        +10℃ ~ +300℃,RH ≤ 80%

        Whole instrument error

        ≤ ±1dB

        Feature

        Data and curves can be printed on paper

        More products
        Electroacoustic analysis system
        CRY6151B
        Electroacoustic analysis system
        More
        Electroacoustic analysis system
        CRY6151
        Electroacoustic analysis system
        More
        After-sales services
        • 20 years industry experience

        • 24 hours Technical Support

        • Professional engineers on line response

        • 2 hours response
          Solution within 2 work days

        • All life Costs Maintenance

        Activity Registration
        If you need to ask the price of CRYSOUND acoustic imager, reserve the free test for a limited time.Please input information and requirements according to the form, and we will arrange engineers to contact you as soon as possible.
        *
        *
        *
        *
        *
        Please select your requirements (pops)*
        Consulting the price
        Appointment Demo
        国产精品三级专区

        <ruby id="zx51z"></ruby>
        <pre id="zx51z"><b id="zx51z"></b></pre>

            <ruby id="zx51z"></ruby>
            <del id="zx51z"><b id="zx51z"><thead id="zx51z"></thead></b></del>

            <p id="zx51z"><mark id="zx51z"><thead id="zx51z"></thead></mark></p><p id="zx51z"><del id="zx51z"></del></p>
            <p id="zx51z"><cite id="zx51z"></cite></p>
              <p id="zx51z"><cite id="zx51z"><progress id="zx51z"></progress></cite></p>

              <p id="zx51z"></p>